Hello Folks! Welcome to Simond Store.

Marine Grade Resin Epoxy System- Wood, Fiberglass, Boat - 6 Gallon Kit

It is a 100% Solid Epoxy with UV Protection additives and Eco-friendly confirms non-yellowing protection for a longer duration. Resin is a 100% solids no VOC, self-levelling, primer less, low odour, non-blushing epoxy that provides a sufficient work life, rapid track free time and high adhesion to aggregates and pavements. Used for laminating, bonding, fairing, coating, and reinforcing. Each kit includes both pre-proportioned resin (part A) and hardener (part B).
Ask for bulk inquiry Sign up for price alert

2 available

$328.49
Simond

Choose shipping at your convenience from multiple shipping options.

Write us now for more information on our products.

100% MoneyBack Guarantee* and Hassel Free Returns Policy.

We appreciate your feedback and are open to your suggestions.

Description

Details

It is a 100% Solid Epoxy with UV Protection additives and Eco-friendly confirms non-yellowing protection for a longer duration.

Resin is a 100% solids no VOC, self-levelling, primer less, low odour, non-blushing epoxy that provides a sufficient work life, rapid track free time and high adhesion to aggregates and pavements. Used for laminating, bonding, fairing, coating, and reinforcing. Each kit includes both pre-proportioned resin (part A) and hardener (part B).

Product Specifications

  • Mixing ratio by volume: 2 parts resin to 1 part hardener
  • Application: Brush, roller, or syringe; can also be poured and spread with an epoxy spreader. 
  • Pot life @ 77°F: 50-70 mins.
  • Resin - Viscosity - CPs @ 77 F - 500 - 900
  • Hardener - Viscosity - CPs @ 77 F - 350 - 500
  • 2:1 Epoxy Resin Colour: Clear
  • Hardener Colour: Water White or light Yellow

Properties

  • Low Viscous and Low Shrinkage distortion
  • Excellent adhesion to various substrates
  • Suitable for elevated Temperature cure
  • Anti-blushing and Non-yellowing
  • Suitable for marine applications
  • Improved Gloss is achieved in coatings
  • Abrasion and Chemical Resistant
  • Fast curing with high mechanical stability
  • Water white clarity is achieved after cure

Handling Precautions : Epoxy resins and Hardeners are chemicals and hygienic procedures should be followed while handling them. Direct contact of resin and hardeners with the skin must be avoided. For more details please refer the material safety data sheet.

Safety Precautions : Prolonged or repeated exposure may cause eye and skin irritation. If contact occurs, wash immediately and seek medical help. Use safety glasses with side shields and wear protective rubber gloves.

Cleaning and Maintenance of Equipment : Tools and mixing equipment are best cleaned immediately after use since removal of cured resin is difficult and time consuming. It is recommended that the bulk of the resin be removed using a scrapper and the remainder washed away using solvents such as toluene, xylene or acetone.

Storage

  • Should be stored in original tightly closed container, in dry and warm conditions.
  • It is advised not to allow the product to freeze.

Instruction

We kindly request you to give us the 100% positive feedback as you will be completely satisfied with the products.
If you have any query related to product, request you to send a mail us on support@simondstore.com it will be our privilege to provide solutions at the earliest & serve you better.
Image displayed is for illustrative purpose only. Actual product may vary from the displayed image but feature and specification would be same or higher as defined above.

Ask For Bulk

Bulk inquiry form








Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register