Hello Folks! Welcome to Simond Store.

Screen Printing Emulsion

3 Item(s)

per page

  • Water Resistant Diazo Screen Printing Emulsion 1 Quart

    Diazo sensitized direct emulsion is recommended for use with discharge, water-based and plastisol inks. It is easy to use with excellent resolution and high definition. Mix the emulsion and sensitizer according to the instructions on the bottle. To reduce air bubbles, let the emulsion stand at least 2 hours before using. Mix the emulsion in a gentle way to extend the life and enhance the output. Before applying you must clean, degreased and dry the screen with help of scoop coater.

    Learn More
  • SBQ-PINK Textile Dual Cure PhotoPolymer Screen Printing Emulsion 1 Quart

    100% SBQ Dual cure photopolymer solution. SBQ DC Photopolymer Screen Printing Emulsion is compatible with Water based, discharge, and Ceramic ink that may require hardener application for long printing runs. 100 % UV, water based UV, Plastisol, and other graphics ink. It doesn’t require additional sensitizer-Ready to use and has long Shelf life. For this emulsion no need of Diazo and also gelling. Working should be under subdued or yellow lights. No additional sensitizer required.

    Learn More
  • SBQ-RED Textile PreSensitized PhotoPolymer Screen Printing Emulsion 1 Quart

    SBQ PURE Photopolymer emulsion use with Plastisol, water based, discharge, Water based UV, Ceramic and other water based ink. No additional sensitizer required. It has very high viscosity about 10000cps allows coating thickness of 100-150 microns with just 3-4 coats on the screen. Very fast exposing with Excellent image Resolution ease in handle. Slowly apply first coat to the print side. Then coat squeegee side with one coat. Always end Coating on the squeegee side of the screen. Apply Reclamier to both sides of the screen using a soft nylon bristle scrub brush. Scrub both sides of the screen and let it dissolve the emulsion.

    Learn More

3 Item(s)

per page